Description

Fully automatic charging for MC, scooters and similar vehicles

Your powersport vehicle always needs to be in top condition to give you the best performance possible. Powersport vehicles are sometimes stored for long periods so the CT5 POWERSPORT battery charger makes sure your batteries are charged to capacity and your vehicle is ready to go when you are. The CT5 POWERSPORT has been designed specifically to charge and maintain powersport batteries using advanced technology to give you three fully automatic charging and maintenance programs – Normal: for all lead-acid batteries, including AGM, Lithium*: for all lithium* batteries and Recond. You can connect it directly to the battery indefinitely, if required, and it won’t over or under charge. It’s easy to use and works with all types of 12V powersport batteries. *)12V lithium batteries (LiFePO4, Li-Fe, Li-iron, LFP)

Features

• Practical and easy to use

• Tests and restores battery capacity

• Output: 2.3A max

• Non sparking

• Reverse polarity protected

• Short circuit proof

Technical data

Battery capacity      5–25 Ah

 

Charging category      AC charging

 

Back current drain*      Corresponding to less than 1.5 Ah/month

 

Back Current Drain, details*)      Back current drain is the current that drains the battery if the charger is not connected to the mains. CTEK chargers have a very low back current.

 

Battery voltage      12 V

 

Battery chemistry      Lead acid; Lithium-ion

 

Ambient operating temperature      -20 ˚C to +50 ˚C

 

Start voltage      2.0 V lead-acid battery types. 5.0 V LiFePO₄.

 

Input      220–240 VAC, 50-60 Hz, 0.3 A

 

Output      14.4/15.8/14.2 V, 2.3 A

 

Battery types      12 V:; WET; MF; Ca/Ca; AGM; GEL; LiFePO₄

 

Degree of protection      IP65

 

Manufacturers Warranty      5 years